絕緣軟管檢測

絕緣軟管檢測簡介

發布時間：2025-05-04 08:20:06

更新時間：2025-09-25 09:28:59

咨詢點擊量：

發布來源：材料檢測中心

第三方絕緣軟管檢測機構北京中科光析科學技術研究所科研分析中心作為綜合性研究所檢測中心，旗下實驗室擁有CMA檢測資質，檢測設備齊全，數據科學可靠，7-15個工作日便可出具絕緣軟管檢測報告。

咨詢檢測服務預約工程師

獲取檢測報價？

了解檢測儀器？

查看報告模板？

立即咨詢

絕緣軟管檢測內容

檢測信息（部分）

什么是絕緣軟管？其用途范圍有哪些？

絕緣軟管是一種用于電氣設備中提供絕緣保護、耐高溫或耐化學腐蝕的柔性管狀材料，廣泛應用于電線電纜防護、汽車線束、電子設備及工業機械等領域。

絕緣軟管檢測的主要目的是什么？

檢測旨在驗證其絕緣性能、機械強度、耐環境老化等關鍵指標是否符合行業標準（如UL、IEC等），確保產品安全性和可靠性。

檢測通常涵蓋哪些內容？

檢測包括物理性能測試、電氣性能測試、耐化學性測試、環境適應性測試及材料成分分析等，具體項目依據產品類型和標準要求而定。

檢測項目（部分）

耐電壓強度：評估絕緣材料在高電壓下的擊穿耐受能力
拉伸強度：測試材料在拉伸狀態下的最大承載能力
體積電阻率：衡量材料抵抗電流通過的能力
熱收縮率：檢測受熱后尺寸變化的穩定性
耐溫等級：確定材料長期使用溫度范圍
阻燃性能：驗證材料遇火時的自熄特性
耐油性：評估接觸油類介質后的性能保持率
耐酸堿腐蝕：測試化學腐蝕環境下的材料穩定性
彎曲疲勞：模擬反復彎折后的結構完整性
介電常數：反映材料儲存電荷的能力
耐電弧性：檢測表面抗電弧燒蝕能力
氧指數：測定材料維持燃燒所需氧氣濃度
吸水率：評估潮濕環境下的絕緣性能變化
硬度測試：測量材料表面抗壓痕能力
顏色穩定性：驗證光照后的顏色保持度
低溫脆性：檢測極寒環境下的柔韌性
壁厚均勻度：確保管體結構的工藝一致性
抗紫外線老化：評估戶外使用時的耐候性
氣味檢測：控制有害揮發性物質釋放
重金屬含量：符合環保法規的化學物質限制

檢測范圍（部分）

PVC絕緣軟管
硅橡膠絕緣軟管
玻璃纖維編織軟管
熱縮套管
尼龍波紋管
聚四氟乙烯套管
聚氨酯防護軟管
陶瓷化硅膠軟管
阻燃編織套管
高壓絕緣套管
汽車線束護套
電機專用絕緣管
防靜電軟管
耐高溫玻璃纖維管
復合絕緣套管
阻燃聚烯烴套管
電磁屏蔽套管
環保型無鹵軟管
防輻射特種軟管
雙壁熱縮套管

檢測儀器（部分）

高低溫試驗箱
萬能材料試驗機
高壓耐壓測試儀
體積電阻測試儀
灼熱絲試驗儀
氧指數測定儀
紫外老化試驗箱
光譜分析儀
密度計
邵氏硬度計

檢測標準（部分）

國家標準 GB/T 7113.1-2014 絕緣軟管第1部分:定義和一般要求

【適用范圍】GB/T 7113的本部分規定了絕緣軟管的定義和一般要求。本部分適用于主要用于電氣設備的導體和接頭絕緣的絕緣軟管。某些型號的軟管也適用于綁扎、識別、外圍密封和機械保護。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

國家標準 GB/T 7113.2-2014 絕緣軟管第2部分:試驗方法

【適用范圍】GB/T 7113的本部分規定了包括熱收縮管在內的絕緣軟管的試驗方法。這類軟管主要被用于電氣設備的導體部分和接頭處的絕緣。 n本部分適用于絕緣軟管。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

國家標準 GB/T 7113.2-2005 絕緣軟管試驗方法

【適用范圍】本部分規定了包括熱收縮管在內的絕緣軟管的試驗方法。盡管這些軟管可用于其他方面，但主要是用于電氣設備導體及接頭的絕緣。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.020-電氣工程綜合

國家標準 GB/T 7113.3-2011 絕緣軟管第3部分：聚氯乙烯玻璃纖維軟管

【適用范圍】GB/T 7113的本部分規定了其有柔軟聚氯乙烯(PVC)或其共聚物或混合物連續涂層的編織或針織E型玻璃纖維軟管的要求。實踐證明該類軟管適合于105℃及以下使用。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

國家標準 GB/T 7113.4-2011 絕緣軟管第4部分：丙烯酸酯玻璃纖維軟管

【適用范圍】GB/T 7113的本部分規定了三種具有丙烯酸酯連續涂層且以擊穿電壓的不同來區分的(GB/T 7113.4的403型:高擊穿電壓;GB/T 7113.4的404型:中等擊穿電壓;GB/T 7113.4的405型:低擊穿電壓)編織或針織E型玻璃纖維軟管的要求。實踐證明該軟管適合于155℃及以下使用。該類軟管的內徑通常在0.30mm至25.00mm之間其壁厚在0.15mm至1.20mm之間并具有下列頗色:黑色、白色、紅色、黃色、藍色、棕色、綠色、綠/黃色及本色。除了本部分所列出的尺寸或顏色其他的尺寸或顏色可根據客戶的需求定制。這些產品如果除尺寸之外其他性能都符合表2、表4所列出的要求則應視為符合本部分。凡符合本部分要求的材料均已達到既定的性能水平。然而用戶在針對某一特定用途選擇材料時宜依據該應用所必需的實際要求來選擇而不應僅僅依據本部分。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

國家標準 GB/T 7113.5-2011 絕緣軟管第5部分：硅橡膠玻璃纖維軟管

【適用范圍】GB/T7113的本部分規定了三種具有硅彈性體連續涂層且以擊穿電壓的不同來區分的(GB/T7113.5-400型:高擊穿電壓;GB/T7113.5-401型:中等擊穿電壓;GB/T7113.5-402型:低擊穿電壓)編織或針織E型玻璃纖維軟管的要求。實踐證明該類軟管適合于180℃及以下使用。 n該類軟管的內徑通常在0.30mm 至25.00mm 之間并具有下列顏色:黑色、灰色、白色、紅色、黃色、藍色、棕色、綠色、黃/綠色及本色。 n除了本部分所列出的尺寸或顏色其他的尺寸或顏色可根據客戶的需求定制。這些產品如果除尺寸之外其他性能都符合表2、表5所列出的要求則應視為符合本部分。 n凡符合本部分要求的材料均已達到既定的性能水平。然而用戶在針對某一特定用途選擇材料時宜依據該應用所必需的實際要求來選擇而不應僅僅依據本部分。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

國家標準 GB/T 7113.6-2011 絕緣軟管第6部分：聚氨脂(PUR)玻璃纖維軟管

【適用范圍】GB/T 7113的本部分規定了溫度指數達到155、具有聚氨酯(PUR)連續涂層的E型玻璃纖維編織軟管的要求。該類軟管的內徑通常在0.50mm至30.00mm之間并具有下列顏色:黑色、藍色、棕色、綠色、灰色、本色、粉紅色、紅色、紫色、白色、黃色及綠/黃色。除了本部分所列出的尺寸或顏色其他的尺寸或顏色可根據客戶的需求定制。這些產品如果除尺寸之外其他性能都符合表2、表4所列出的要求則應視為符合本部分。凡符合本部分要求的材料均已達到既定的性能水平。然而用戶在針對某一特定用途選擇材料時宜依據該應用所必需的實際要求來選擇而不應僅僅依據本部分。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

國家標準 GB/T 7113-2003 絕緣軟管定義和一般要求

【適用范圍】本標準適用于包括熱收縮管在內的主要用于電氣設備的導體及接線絕緣的絕緣軟管。某些類型的軟管也適合用于將若干根絕緣導線合并套在一起。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

行業標準 JB/T 7093-2015 絕緣軟管硅樹脂玻璃纖維自熄管

【適用范圍】本標準規定了電氣用硅樹脂玻璃纖維自熄管（以下簡稱自熄管）的產品分類、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。rn本標準適用于由無堿玻璃纖維編織管經高溫處理涂以有機硅共聚樹脂而成的電氣用自熄管。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

行業標準 JB/T 8151.1-1999 絕緣軟管規范各種型號軟管的規范要求硅橡膠玻璃漆管

【適用范圍】　　本標準規定了硅橡膠玻璃纖維軟管的要求。rn 本標準適用于由無堿玻璃纖維編織管涂以硅橡膠經硫化而成的絕緣軟管。軟管的內徑通常為0.3～27mm，其顏色有:黑、灰、白、紅、黃、藍、棕、綠/黃和本色。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.01-絕緣材料綜合

行業標準 JB/T 8151.2-1999 絕緣軟管規范各種型號軟管的規范要求聚氯乙烯玻璃纖維軟管

【適用范圍】　　本標準規定了聚氯乙烯玻璃纖維軟管的要求。rn 本標準適用于由無堿玻璃纖維編織管涂以聚氯乙烯樹脂而成的絕緣軟管。軟管的內徑通常為0.3～27mm，其顏色有:黑、白、紅、黃、藍、棕、綠、灰、橙、粉紅和綠/黃。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.01-絕緣材料綜合

行業標準 NB/T 10825-2021 新能源汽車用硅橡膠玻璃纖維絕緣軟管

【適用范圍】本文件規定了新能源汽車用硅橡膠玻璃纖維絕緣軟管的產品命名、性能要求、試驗方法、檢驗規則、包裝、標志、運輸和貯存。
本文件適用于新能源汽車用硅彈性體連續涂層E型玻璃纖維編織或針織絕緣軟管。

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.99-其他絕緣材料

國際標準 IEC 684-3-201-1991 絕緣軟管--第2部分：試驗方法

【適用范圍】

【中國標準分類】 L85 電子測量與儀器【國際標準分類】 17.220.99-有關電學和磁學的其他標準

國際標準 IEC 60684-2-2003 絕緣軟管--第3部分:各種型號軟管的規范--活頁247：雙重中厚壁不阻燃聚烯烴熱收縮軟管

【適用范圍】

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-284-2014 絕緣軟管--第3部分：各種型號軟管的規范--活頁284：油隔離用熱收縮軟管

【適用范圍】This part of IEC 60684 gives the requirements for heat-shrinkable sleevings for oil barrier
medium voltage cable jointing and termination applications with nominal shrink ratios of up to
3:1.
These sleevings have been found suitable for use up to temperatures of 80 °C.
Type A: polyolefin based.
Type B: fluoropolymer based enhanced oil resistance.
These sleevings are normally supplied as translucent.
Since these types of sleevings cover a significantly large range of sizes and wall thicknesses
Annex A Tables A.1 and A.2 in this document provide a guide to the range of sizes
available. The actual size will be agreed between the purchaser and supplier.
Materials which conform to this standard meet established levels of performance. However
the selection of a material by a user for a specific application should be based on the actual
requirements necessary for adequate performance in that application and not based on this
standard alone.
This sleeving is designed to be used in MV cable accessories and as such electrical
performance as defined as part of the assembly. Examples of this are described in HD 629
and IEC 60502 series.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-285-2014 絕緣軟管--第3部分：各種型號軟管的規范--活頁285：中壓接頭絕緣用熱收縮聚烯烴軟管

【適用范圍】This part of IEC 60684 gives the requirements for heat-shrinkable sleeving for medium
voltage joint insulation with a range of shrink ratios.
This sleeving has been found suitable up to temperatures of 100 °C.
These sleevings are normally supplied in colour red or brown.
Since this type of sleevings covers a significantly large range of sizes and wall thicknesses
the actual size will be agreed between the purchaser and supplier.
Materials which conform to this standard meet established levels of performance. However
the selection of a material by a user for a specific application should be based on the actual
requirements necessary for adequate performance in that application and not based on this
standard alone. This sleeving is designed to be used in medium voltage cable accessories
and as such electrical performance will be proven as part of the assembly. Examples of this
are described in HD 629 and IEC 60502.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-216-2013 絕緣軟管--第3部分：各種型號軟管的規范--活頁216：阻燃、熱收縮限制火險軟管

【適用范圍】This sheet of IEC 60684-3 gives the requirements for four types of heat-shrinkable flameretarded nlimited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shownnbelow:nClass A: thin wall shrink ratio 2:1 internal diameter up to 102 0 mmnClass B: medium wall shrink ratio 2:1 internal diameter up to 60 0 mmnClass C: thick wall shrink ratio 2:1 internal diameter up to 51 0 mmnClass D: medium wall shrink ratio 3:1 internal diameter up to 40 0 mmnThese sleevings are normally supplied in the following colours: black red green blue white nyellow and green/yellow.nSizes or colours other than those listed in this standard may be available as custom items.nThese items shall be considered to comply with this standard if they comply with the propertynrequirements listed in tables 5 6 7 and 8 excluding dimensions and mass.nMaterials which conform to this specification meet established levels of performance.nHowever the selection of a material by a user for a specific application should be based onnthe actual requirements necessary for adequate performance in that application and notnbased on this specification alone.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-280-2013 絕緣軟管--第3部分：各種型號軟管的規范--活頁280：熱收縮抗漏電聚烯烴軟管

【適用范圍】This part of IEC 60684 gives the requirements for heat-shrinkable polyolefin sleeving antitrackingnwith a nominal shrink ratio of 3:1.nThis sleeving has been found suitable for use at temperatures up to 100 °C.nTypically: medium wall internal diameter up to 110 mm.nThese sleevings are normally supplied in the colours red or brown.nSince these types of sleevings cover a significantly large range of sizes and wall thicknesses nTable A.1 in this standard provides guidance on the range of sizes available. The actual sizenshall be agreed between the user and the supplier.nMaterials which conform to this specification meet established levels of performance.nHowever the selection of a material by a user for a specific application should be based onnthe actual requirements necessary for adequate performance in that application and notnbased on this specification alone.nThis sleeving is designed to be used in medium voltage cable accessories and as suchnelectrical performance must be proven as part of the assembly. Examples of this arendescribed in HD 629 and IEC 60502 series.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-271-2011 絕緣軟管--第3部分：各種型號軟管的規范--活頁271：收縮比為2:1的耐流體、阻燃、熱收縮合成橡膠軟管

【適用范圍】This part of IEC 60684 gives the requirements for four types of heat-shrinkable flame retarded fluid resistant elastomer sleevings nominal shrink ratio of 2:1.nType A: standard wall thickness for use at temperatures up to 120 °CnType B: thin wall thickness for use at temperatures up to 120 °CnType C: standard wall thickness for use at temperatures up to 150 °CnType D: thin wall thickness for use at temperatures up to 150 °CnThese sleevings are normally supplied with internal diameters up to 102 mm for the standard wall thickness and up to 51 mm for the thin wall thickness. The standard colour is black.nSizes or colours other than those specifically listed in this standard may be available as custom items. These items are considered to comply with this standard if they comply with the property requirements listed in Tables 1 2 3 4 5 and 6 except for dimensions and mass.nMaterials which conform to this specification meet established levels of performance. However the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-247-2011 絕緣軟管--第3部分：各種型號軟管的規范--活頁247：雙重中厚壁不阻燃聚烯烴熱收縮軟管

【適用范圍】This part of IEC 60684 gives the requirements for two types of heat-shrinkable polyolefin sleeving dual wall not flame retarded with a nominal shrink ratio of 3:1.nThis sleeving has been found suitable for use at temperatures of up to 100 °C.nType A : Medium wall internal diameter up to 200 0 mm typicallynType B : Thick wall internal diameter up to 200 0 mm typicallynThese sleevings are normally supplied in colour black.nSince these types of sleevings cover a significantly large range of sizes and wall thicknesses Tables A.1 and A.2 provide a guide to the range of sizes available. The actual size shall be agreed between the user and supplier.nMaterials which conform to this specification meet established levels of performance. However the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-205-2011 絕緣軟管--第3部分：各種型號軟管的規范--活頁205：額定收縮比為1、7:1和2:1的阻燃氯化聚烯烴熱收縮軟管

【適用范圍】This part of IEC 60684 gives the requirements for one type of heat-shrinkable chlorinated polyolefin sleeving flame retarded nominal shrink ratio 1 7:1 and 2:1 for use at temperatures up to 120 °C.nThese sleevings are normally supplied with internal diameters up to 102 mm and the standard colour is black.nSizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in Tables 3 4 and 5 except for dimensions and mass and Table 6 as applicable.nMaterials which conform to this specification meet established levels of performance. However the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-116-2010 絕緣軟管--第3部分：各種型號軟管的規范--活頁116和117：通用擠壓聚氯丁烯軟管

【適用范圍】This part of IEC 60684 gives the requirements for non-heat-shrinkable sleeving extruded fromncompounds based on polychloroprene elastomer.This sleeving has been found suitable forntemperatures up to 95 oC.nSleeving of this type is normally available with internal diameters up to 25 mm and in thenfollowing opaque colours: black brown red orange yellow green blue violet grey white andnpink. Sizes or colours other than those specifically listed in this standard may be available asncustom items. These items shall be considered to comply with this standard if they comply withnthe other property requirements listed in Table 2.nMaterials which conform to this specification meet established levels of performance. However nthe selection of a material by a user for a specific application should be based on the actualnrequirements necessary for adequate performance in the application and not based on thenspecification alone.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-281-2010 絕緣軟管--第3部分：各種型號軟管的規范--活頁281：熱收縮半導電聚烯烴軟管

【適用范圍】This part of IEC 60684 gives the requirements for two types of heat-shrinkable polyolefinnsleeving semiconductive with a nominal shrink ratio of 3:1.nThis sleeving has been found suitable up to temperatures of 100 °C.n– Type A: Thin wall Internal diameter up to 195 0 mm typicallyn– Type B: Medium wall Internal diameter up to 120 0 mm typicallynThese sleevings are normally supplied in the colour black.nSince these types of sleevings cover a significantly large range of sizes and wall thicknesses nTables A.1 and A.2 in this standard provides guidance to the range of sizes available. Thenactual size shall be agreed between the user and the supplier.nMaterials which conform to this specification meet established levels of performance.nHowever the selection of a material by a user for a specific application should be based onnthe actual requirements necessary for adequate performance in that application and notnbased on this specification alone.nThis sleeving is designed to be used in MV cable accessories and as such electricalnperformance must be proven as part of the assembly. Examples of this are described in HDn629 and IEC 60502 series.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-282-2010 絕緣軟管--第3部分：各種型號軟管的規范--活頁282：熱收縮聚烯烴軟管--應力控制

【適用范圍】This part of IEC 60684 gives the requirements for two types of heat-shrinkable polyolefinnsleeving stress control not flame retarded with a nominal shrink ratio up to 3:1.nThis sleeving has been found suitable for use up to temperatures of 100 °C.n– Type A : Medium wall Internal diameter up to 65 0 mm typicallyn– Type B : Thick wall Internal diameter up to 95 0 mm typicallynThese sleevings are normally supplied in colour black.nSince these types of sleevings cover a significantly large range of sizes and wall thicknesses nTables A.1 and A.2 in this standard provides guidance to the range of sizes available. Thenactual size shall be agreed between the user and the supplier.nMaterials which conform to this specification meet established levels of performance.nHowever the selection of a material by a user for a specific application should be based onnthe actual requirements necessary for adequate performance in that application and notnbased on this specification alone.nThis sleeving is designed to be used in MV cable accessories and as such electricalnperformance must be proven as part of the assembly. Examples of this are described innHD 629 and the IEC 60502 series.n

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-209-2010 絕緣軟管--第3部分：各種型號軟管的規范--活頁209：通用阻燃聚烯烴熱收縮軟管

【適用范圍】This part of IEC 60684 gives the requirements for two types of general purpose flexible flamenretarded heat-shrinkable polyolefin sleeving. This sleeving has been found suitable for use atntemperatures up to 125 °C.n– Type A – Highly flame retardedn– Type B – Flame retardednThe minimum supplied and maximum recovered internal diameters shall be specified by thenmanufacturer and shall meet the minimum wall thicknesses given in Table 2.nIt is normally available in bore sizes up to 75 mm as supplied and in the following colours:nblack brown white red yellow green blue orange violet grey and yellow/green.nMaterials which conform to this specification meet established levels of performance. However nthe selection of a material by a user for a specific application should be based on the actualnrequirements necessary for adequate performance in that application and not based on thisnspecification alone.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-280-2010 絕緣軟管--第3部分：各種型號軟管的規范--活頁280：熱收縮抗漏電聚烯烴軟管

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-248-2007 絕緣軟管--第3部分：各種型號軟管的規范--第248頁：收縮比為2:1 3:1 4:1的通用熱收縮、阻燃、雙重管壁聚烯烴軟管

【適用范圍】This part of IEC 60684 gives the requirements for six types of general purpose heat shrinkable dual wall polyolefin sleevings flame retarded with nominal shrink ratios of 2:1 3:1 or 4:1 and available in low and high temperature adhesive inner walls.nThe low temperature adhesive sleeving has been found suitable for temperatures up to 105 °C and the high temperature adhesive sleeving has been found suitable for temperatures up to 125 °C.n- Type AL:n2:1 shrink ratio internal diameter up to 51 mm low temperature adhesive inner wall.n- Type AH:n2:1 shrink ratio internal diameter up to 51 mm high temperature adhesive inner wall.n- Type BL:n3:1 shrink ratio internal diameter up to 40 mm low temperature adhesive inner wall.n- Type BH:n3:1 shrink ratio internal diameter up to 40 mm high temperature adhesive inner wall.n- Type CL:n4:1 shrink ratio internal diameter up to 52 mm low temperature adhesive inner wall.n- Type CH:n4:1 shrink ratio internal diameter up to 52 mm high temperature adhesive inner wall.nThe sleeving consists of an outer layer being of a flexible cross-linked polyolefin. The inner wall consists of a hot melt adhesive that flows and fuses during the shrinking process to provide a bond.nThese sleevings are normally supplied in colour black.nSizes or colours other than those listed in this standard may be available as custom items. These items are considered to comply with this standard if they comply with the property requirements listed in Tables 5 and 6 and Table 8 where applicable with the exception of dimensions.nMaterials which conform to this specification meet established levels of performance. However the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.n

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-211-2007 絕緣軟管--第3部分：各種型號軟管的規范--第211頁：收縮比為2:1的通用半剛性聚烯烴熱收縮軟管

【適用范圍】This part of IEC 60684 gives the requirements for four types of semi-rigid heat-shrinkable polyolefin sleeving with a nominal shrink ratio of 2:1 that has been found suitable for temperatures up to 135 °C.n- Type A: general purpose flame-retarded opaque colours;n- Type B: general purpose non flame-retarded translucent;n- Type C: fluid resistant flame-retarded opaque colours:n- Type D: fluid resistant non flame-retarded translucent.nThe sleeving is normally available in internal diameter sizes up to 12 7 mm as supplied in the following colours: black white red yellow blue and translucent.nSizes or colours other than those specifically listed in this standard may be available as custom items. The items are considered to comply with this standard if they comply with the property requirements listed in tables 2 3 and also with the property requirements of Table 4 for types C and D excluding dimensions.nMaterials which conform to this specification meet established levels of performance. However the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that app/ication and not based on rnr's specification alone.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-246-2007 絕緣軟管--第3部分：各種型號軟管的規范--第246頁：雙壁非阻燃聚烯烴熱收縮軟管

【適用范圍】This part of IEC 60684 defines requirements for dual wall non-flame retarded heat shrinkable polyolefin sleeving. This sleeving has been found suitable for use up to 110 °C.nThe sleeving consists of an outer layer made of a semi-rigid cross-linked material.nThe inner layer is a substantially non-cross-linked polyolefin that flows and fuses during the shrinkage process to provide a seal.nIt is normally offered for sale with an internal diameter up to 25 mm in the following colours:nblack white red yellow blue and translucent.nSizes or colours other than those listed in this standard may be available as custom items. These items are considered to comply with this standard if they comply with the property requirements listed in Tables 2 3 4 and 5 excluding dimensions.nMaterials which conform to this specification meet established levels of performance. However the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.n

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-216-2005 絕緣軟管第3部分：各種型號軟管的規范活頁216：阻燃、熱收縮限制火險軟管

【適用范圍】

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-212-1998 絕緣軟管第3部分：各種型號軟管的規范活頁212：收縮比為2:1的阻燃熱收縮聚烯烴軟管

【適用范圍】

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-217-1998 絕緣軟管第3部分:各種型號軟管規范活頁217:熱收縮聚烯烴軟管阻燃、收縮比3:1

【適用范圍】This sheet of IEC 60684-3 gives the requirements for one type of heat-shrinkable flame retarded polyolefin sleeving with a temperature index of 135 and a nominal shrink ratio of 3:1.nThis sleeving is normally supplied with internal diameters up to 39 mm and in the following colours: black brown red yellow green blue orange violet grey and white.nSizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in tables 1 2 3 4 and 5.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-228-1998 絕緣軟管第3部分:各種型號軟管的規范活頁151:通用擠壓PVC/腈橡膠軟管

【適用范圍】

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-246-1992 絕緣軟管--第3部分:各種型號軟管的規范--活頁247：雙重中厚壁不阻燃聚烯烴熱收縮軟管

【適用范圍】

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-280-2019 絕緣軟管--第3部分：各種型號軟管的規范--活頁280：熱收縮抗漏電聚烯烴軟管

【適用范圍】This part of IEC 60684 gives the requirements for heat-shrinkable polyolefin sleeving anti- tracking with a nominal shrink ratio of 3:1.
This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall internal diameter up to 110 mm.
This sleeving is normally supplied in the colours red or brown.
Since these types of sleeving cover a significantly large range of sizes and wall thicknesses Annex A (Table A.1) provides guidance on the range of sizes available. The actual size will be agreed between the user and the supplier.
Materials which conform to this specification meet established levels of performance. However the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance willbe proven as part of the assembly. Examples of this are described in HD 629.1 and IEC 60502 (all parts).

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-216-2019 絕緣軟管--第3部分：各種型號軟管的規范--活頁216：阻燃、熱收縮限制火險軟管

【適用范圍】This part of IEC 60684-3 gives the requirements for four types of heat-shrinkable flame-
retarded limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown
below.
Class A: thin wall shrink ratio 2:1 internal diameter up to 102 0 mm
Class B: medium wall shrink ratio 2:1 internal diameter up to 60 0 mm
Class C: thick wall shrink ratio 2:1 internal diameter up to 51 0 mm
Class D: medium wall shrink ratio 3:1 internal diameter up to 40 0 mm
These sleevings are normally supplied in the following colours: black red green blue white
yellow and green/yellow.
Sizes or colours other than those listed in this document are available as custom items. These
items are considered to comply with this document if they comply with the property
requirements listed in Tables 5 6 7 and 8 excluding dimensions and mass.
Materials which conform to this specification meet established levels of performance.
However the selection of a material by a user for a specific application will be based on the
actual requirements necessary for adequate performance in that application and not based on
this specification alone.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 62237-2003 帶電工作-水壓工具和設備裝置絕緣軟管

【適用范圍】Is applicable to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency. Insulating hoses with fittings are used to provide a connection between the hydr

【中國標準分類】 K34 低電壓器【國際標準分類】 29.260.99-特殊工作條件用其他電氣設備

國際標準 IEC 60684-3-216-2001/COR.1-2003 絕緣軟管.第3部分:各種型號軟管規范.活頁216:熱縮、阻燃、耐火軟管

【適用范圍】This standard is Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable flame-retarded limited-fire-hazard sleeving; Corrigendum 1.

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料

國際標準 IEC 60684-3-136-1997/COR.1-1999 絕緣軟管.第2部分:試驗方法

【適用范圍】This is Technical Corrigendum 1 to IEC 60684-2-1997 (Flexible insulating sleeving -Part 2: Methods of test)

【中國標準分類】 K15 電工材料和通用零件【國際標準分類】 29.035.20-塑料和橡膠絕緣材料